top of page
2P025A

2P025A

SKU: 2P025A
Operation: This valve is a two-way, normally closed, direct-acting valve & does not require a minimum differential pressure to operate. As shown in the diagrams below, when the coil is de-energized (left diagram), the plunger rests on the main orifice & is held in place by the plunger spring force, sealing the valve. When the coil is energized (right diagram), the solenoid lifts the plunger & allows the working medium to flow through the orifice. The working medium & flow direction are indicated in purple in the diagrams.
 
DOWNLOAD PDF

  • Product Specifications

    Valve Model 2P025-1/8A 2P025-1/4A
    Port Size 1/8” NPT 1/4” NPT
    Orifice 2.5mm 2.5mm
    Flow Coefficient (Cv) 0.23 0.23
    Valve Type 2 Way, Normally Closed (NC) 2 Way, Normally Closed (NC)
    Action Direct Acting (Poppet) Fast Response Time: Direct Acting (Poppet)
    Fast Response Time: <20msec
    22SCFM at 100PSI    		 Direct Acting (Poppet) Fast Response Time: Direct Acting (Poppet)
    Fast Response Time: <20msec
    22SCFM at 100PSI
    Wetted Surfaces Valve Body: Engineered Acetal Plastic (Delrin POM) Seal: Viton (FKM) Armature Assembly: Stainless Steel Valve Body: Engineered Acetal Plastic (Delrin POM) Seal: Viton (FKM) Armature Assembly: Stainless Steel
    Seal Material Viton (FKM) Viton (FKM)
    Operating Temperature

    Media: 14°F to 176°F (-10°C to 80°C)

    Ambient: 14°F to 122°F (-10°C to 50°C)

    Media: 14°F to 176°F (-10°C to 80°C)

    Ambient: 14°F to 122°F (-10°C to 50°C)
    Operating Pressure 0 PSI to 150 PSI 0 PSI to 150 PSI
    Electrical Connections

    D: DIN

    G: Grommet

    E: Explosion Proof Coil (200C-E) 1/2” NPT Conduit Connection with 24in Three-Strand Wires

    ATEX: Explosion Proof Coil (200C-ATEX)

    DIN43650B Connection with 10ft Three-Wired Cable and Sleeve

    D: DIN

    G: Grommet

    E: Explosion Proof Coil (200C-E) 1/2” NPT Conduit Connection with 24in Three-Strand Wires

    ATEX: Explosion Proof Coil (200C-ATEX)

    DIN43650B Connection with 10ft Three-Wired Cable and Sleeve
    Coil Power 3-6.5W 3-6.5W
    Coil Duty 100% ED (Continuous Duty) 100% ED (Continuous Duty)
    Voltage Options 12VDC, 24VDC, 24VAC, 110/120VAC (50/60Hz), 220/240VAC (50/60Hz) 12VDC, 24VDC, 24VAC, 110/120VAC (50/60Hz), 220/240VAC (50/60Hz)
    Voltage Tolerance ±10% of Specified Voltage ±10% of Specified Voltage
    Ingress Protection IP65 IP65
    Insulation Class H Class H Class
    Installation No Orientation Requirement Optimum Position: Flow Horizontal and Solenoid Vertical No Orientation Requirement Optimum Position: Flow Horizontal and Solenoid Vertical
    Service Liquid, Water, Air Liquid, Water, Air
bottom of page