Badger Meter RCT1000 Coriolis Flow Meter
Badger Meter RCT1000 Coriolis Flow Meter identifies flow rate by directly measuring mass flow and density of fluids over a wide range of process temperatures with a high degree of accuracy. For homogenous fluids consisting of two components like sugar and water, the RCT1000 Coriolis system can derive the concentration and mass of each component based on fluid properties and density measurement. Furthermore, the unobstructed, open flow design makes it suitable for a variety of fluids such as slurries and other viscous, nonconductive fluids that are difficult to measure with other technologies.
The Coriolis design and measurement principle allows the meter to be an exceptional device in measuring:
- Vegetable oils and fats
- Homogeneous suspensions and slurries
- Adhesives, glues or binding materials
- Coatings and hardeners
- Dyes, fragrances, vitamins and other additives
The RCT1000 transmitters provide a variety of means to integrate the meter's output into new and existing operations. The batch and PID functionality enables direct control of devices, such as valves, by use of digital or analog outputs. Additionally, programmable digital outputs can indicate low and high alarm conditions. Network options are available including EtherNet/IP, Modbus TCP/IP and Modbus RTU.
Product Specifications
- Measures either liquid or gas
- Unobstructed open flow design
- Pipe sizes 1/4 inch up to 3 inches
- Accuracy:
- Liquids: up to ±0.1% of flow rate ± zero stability
- Gases: up to ±0.5% of flow rate ± zero stability
- Density: up to ±0.03121 lb/ft3 (0.0005 g/cm3)
- Zero stability up to ±0.025% of full scale
- Repeatability up to ±0.05% of flow rate
- -40 to 392°F (-40 to 200°C) process temp range
- Wetted material: 316L stainless steel
A completed RCT1000 application data form is required for this meter.