top of page
Explosion Proof Coils

Explosion Proof Coils

SKU: Explosion Proof Coils
VIEW PDF
 
200C-E Coil:
This solenoid coil is an encapsulated electrical device as per Group II, designed for applications in hazardous locations according to Zone 1 and Division 1 & 2 for temperature Class T4.
 
200C-ATEX Coil:
This solenoid coil is an encapsulated safe electrical apparatus of Group II, designed for application in atmospheres according to Category 2G & 2D, the EPL is Gb & Db, Temperature Class 4.
 
2W200C-ATEX Coil:
​​​​​​​This solenoid coil is an encapsulated safe electrical apparatus of Group II, designed for application in atmospheres according to Category 2G & 2D, the EPL is Gb & Db, Temperature Classes 4 & 5.

  • Installation Instructions

    To Connect a DIN Coil:

    • Remove the Philips screw from the plastic housing & unplug from the DIN coil.

    • Use the removed screw to push the terminal block out of the plastic DIN housing. • Note the “1”, “2”, and ground “⏚” symbols.

    • For DC DIN Coils, connect “1” to your positive lead & “2” to your negative lead.

    • For AC DIN Coils, connect “1” to your HOT lead, “2” to your NEUTRAL lead, and “⏚” to your ground lead, if required.

     

     

    To Connect a Grommet Coil:

    • For DC Coils, connect the red wire to your positive lead & the black wire to your negative lead.

    • For AC Coils, connect the black wire to your HOT lead & the white wire to your NEUTRAL lead.

    • For Coils provided with Molded Cables, the color of the wire indicates the type of lead:

                      • GREEN = Ground Wire

                      • BLUE = Positive or HOT Wire

                      • BROWN = Negative or Neutral Wire

bottom of page