Extractor Dryers
1. Compressed air containing tiny particles of dirt, dust, oil and moisture enters the first stage of the Extractor/Dryer®.
2. A coalescing effect occurs as air passes through a cartridge mesh filter that captures particles and causes moisture to form larger droplets.
3. Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture to condense on the honeycomb.
4. Particle-laden water flows along the bottom and out the drain.
5. Air passes through the second stage, wire supported fiber, filter cartridge that captures remaining particles down to 5 micron.
6. Remaining moisture and contaminates are dried and filtered in the second stage filter.
7. Exhaust air is clean and dry - no dirt, rust, oil or water droplets to disrupt air equipment operation.
Product Specifications
MODELS
NPT
SCFM
MAX PSI
SERVICE KIT
SIZE (INCHES)
APPROX WT. LBS
520A Top port
1/4”
15
250
015SK
7-1/8 x 3 x 1-1/4
2#
520B Side Port
1/4”
15
250
015SK
8-1/4 x 3 x 1-3/4
2#
105
1/4”
50
250
050SKA
8-1/4 x 4 x 2-1/2
3#
106
3/8”
50
250
050SKA
8-1/4 x 4 x 2-1/2
3#
107
1/2”
50
250
050SKA
8-1/4 x 4 x 2-1/2
3#
110
1/2”
80
250
080SKA
11-3/4 x 6 x 3-1/4
6#
111
3/4”
80
250
080SKA
11-3/4 x 6 x 3-1/4
6#
120
1”
150
250
150SKA
15 x 9-1/2 x 5-1/2
15#
140
1-1/2”
250
250
250SKA
20 x 12-1/2 x 7-1/4
36#
180
2”
500
150
500SKA
27 x 18 x 9-3/4
70#
Additional Features
- Models range from 15 SCFM thru 2,000 SCFM
- Standard 5 micron ratings (lower micron rating available)
- Removes 99.9% of the liquids entering the Extractor/Dryer
- Easy to install and maintain without removal from air line
- Lightweight aluminum housing
- Immediate cost savings from decreased downtime
- Standard inlet and outlet NPT sizes
- Improve equipment performance and product quality
- Standard Differential Pressure Gauge for rust and dirt particles